Heavyduty Mining Teeth

Rope shovel bucket teeth
Dragline bucket teeth
Electric rope shovel teeth
Mining excavator teeth
Super largge bucket adaptor

Send Inquiry

Product Introduction

Classification

Rope shovel bucket teeth
Dragline bucket teeth
Electric rope shovel teeth
Mining excavator teeth
Super largge bucket adaptor
Giant bucket teeth
Huge bucket teeth
Large bucket teeth
Underground mining loader teeth
Surface mining loader teeth

Material

Carbon customize range: 0.18-0.35%
Mo customize range: 0.3-0.6%
Ni customize range: 0.6-1.2%
Pure molten steel with less Nitrogen
Pure molten steel with less Phosphorus
Pure molten steel with less Sulfur

Application

Liebherr R994, R992, R9100, R9200, R9300, R9350, R9250, R9600, R9800
Hydraulic shovel
CAT 6015 6020 6030 CAT6040 6060 6090 CAT390F CAT5080
HITACHI EX2500 EX1800 EX3600 EX5500
KOMATSU PC2000 PC3000 PC5000 PC5500 PC7000-1
Electric rope shovel
CAT 7495, CAT 7295, CAT 7395,
P&H 2100, P&H 2800, P&H 4100, P&H 4800,
WK-20, WK-25, WK-12C, WK-35, WK-55, WK-75
Draglines
Mining loader: SANDIVK LOADER LH514, LH517, LH621, LH518, LH625
CAT 980C, 992K, CAT 994, CAT 988
CAT R1300G, CAT R3000H, CAT R2900G, CAT R2300G, CAT R1700, CAT R1600H
KOMATSU WA800, WA900, WA1200-6, WE1350, WE1850, WE2350

FAQ

Q: Why we have to use sand casting process to manufacturer mining bucket teeth?

A: Sand casting can adapt to various complex shapes of castings and has a relatively low cost. But in terms of specific process selection, it still needs to be determined based on the specific casting situation, such as factors such as the shape, size, and material of the casting. For some large castings, sand gravity casting or low-pressure casting can be used to improve the compactness and mechanical properties of the castings. Mold design is a key link in the casting process. The design of the mold should be based on the requirements of the shape and size of the casting. For some complex shaped castings, split casting can be used, which involves dividing complex shaped castings into several simple shaped castings for separate casting, and then assembling them together. This can not only improve the accuracy of the casting, but also ensure the dimensional accuracy of the casting. In the design of the mold, it is also necessary to consider issues such as exhaust and ejector pins to prevent defects in the casting during the filling and solidification process.

Q: Can MTG, ESCO, HENSLEY, KOMATSU, BYG, CATERPILLAR, H&L, SANDVICK mining bucket tooth be replaced by HR parts?

A: HR can manufacturer mining bucket teeth with expired patent protection period.
HR can also customize improved and legally designed mining bucket teeth.
HR have the ability to produce OEM standard mining bucket tooth.

Hot Tags: heavyduty mining teeth, China heavyduty mining teeth manufacturers, suppliers, factory, end bits for mining loaders, excavator bucket replacement parts, mini steel casting machining, wear resistant steel castings, aviation steel accessories, drilling machinery teeth

Mining Machinery Wear Parts

Heat Resistant Steel Castings